首先你建一个桥 /interface bridge add
print 查看.
Flags: X - disabled, R - running
0 R name="bridge1" mtu=1500 arp=reply-only mac-address=00:0C:42:15:1A:2D
protocol-mode=stp priority=0x8000 auto-mac=yes
admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s
transmit-hold-count=6 ageing-time=5m
/interface bridge>port回车
/interface bridge port> add
bridge: bridge1
interface: ether1
/interface bridge port> add
bridge: bridge1
interface:wlan1
/interface bridge port> print
Flags: X - disabled, I - inactive, D - dynamic
0 ether1 bridge1 0x80 10 none
1 wlan1 bridge1 0x80 10 none
把ehter1上的IP地址什么的.都转到bridge1上边
/interface bridge port>.. (这两个点点回车后退到上一级)
/interface bridge>.. (回车)
/interface>wireless
/interface wireless>print
Flags: X - disabled, R - running
0 X name="wlan1" mtu=1500 mac-address=00:11:F5:39:64:22 arp=enabled
interface-type=Atheros AR5213 mode=station-wds ssid="MikroTik"
frequency=2437 band=2.4ghz-g-turbo scan-list=default antenna-mode=ant-a
wds-mode=dynamic wds-default-bridge=bridge1 wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
/interface wireless>en 0
Flags: X - disabled, R - running
0 R name="wlan1" mtu=1500 mac-address=00:11:F5:39:64:22 arp=enabled
interface-type=Atheros AR5213 mode=station-wds ssid="MikroTik"
frequency=2437 band=2.4ghz-g-turbo scan-list=default antenna-mode=ant-a
wds-mode=dynamic wds-default-bridge=bridge1 wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
说明无线网卡启用了
/interface wireless>set wlan1 mode=ap frequency=2447 band=2.4Ghz-b/g
/interface wireless>print
Flags: X - disabled, R - running
0 name="wlan3" mtu=1500 mac-address=00:07:13:7C:03:CB arp=enabled
interface-type=Atheros AR5213 mode=ap-bridge ssid="MikroTik"
frequency=2447 band=2.4ghz-b/g scan-list=default antenna-mode=ant-a
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
至此,你应该能搜到一个SSID为MikroTik无线网络了.文中有些地方是笔者的路由.你自己要看自己的实际情况.基本上差不多.如果有问题可以加我QQ:652912402
print 查看.
Flags: X - disabled, R - running
0 R name="bridge1" mtu=1500 arp=reply-only mac-address=00:0C:42:15:1A:2D
protocol-mode=stp priority=0x8000 auto-mac=yes
admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s
transmit-hold-count=6 ageing-time=5m
/interface bridge>port回车
/interface bridge port> add
bridge: bridge1
interface: ether1
/interface bridge port> add
bridge: bridge1
interface:wlan1
/interface bridge port> print
Flags: X - disabled, I - inactive, D - dynamic
0 ether1 bridge1 0x80 10 none
1 wlan1 bridge1 0x80 10 none
把ehter1上的IP地址什么的.都转到bridge1上边
/interface bridge port>.. (这两个点点回车后退到上一级)
/interface bridge>.. (回车)
/interface>wireless
/interface wireless>print
Flags: X - disabled, R - running
0 X name="wlan1" mtu=1500 mac-address=00:11:F5:39:64:22 arp=enabled
interface-type=Atheros AR5213 mode=station-wds ssid="MikroTik"
frequency=2437 band=2.4ghz-g-turbo scan-list=default antenna-mode=ant-a
wds-mode=dynamic wds-default-bridge=bridge1 wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
/interface wireless>en 0
Flags: X - disabled, R - running
0 R name="wlan1" mtu=1500 mac-address=00:11:F5:39:64:22 arp=enabled
interface-type=Atheros AR5213 mode=station-wds ssid="MikroTik"
frequency=2437 band=2.4ghz-g-turbo scan-list=default antenna-mode=ant-a
wds-mode=dynamic wds-default-bridge=bridge1 wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
说明无线网卡启用了
/interface wireless>set wlan1 mode=ap frequency=2447 band=2.4Ghz-b/g
/interface wireless>print
Flags: X - disabled, R - running
0 name="wlan3" mtu=1500 mac-address=00:07:13:7C:03:CB arp=enabled
interface-type=Atheros AR5213 mode=ap-bridge ssid="MikroTik"
frequency=2447 band=2.4ghz-b/g scan-list=default antenna-mode=ant-a
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
default-authentication=yes default-forwarding=yes default-ap-tx-limit=0
default-client-tx-limit=0 hide-ssid=no security-profile=default
compression=no
至此,你应该能搜到一个SSID为MikroTik无线网络了.文中有些地方是笔者的路由.你自己要看自己的实际情况.基本上差不多.如果有问题可以加我QQ:652912402
