Configurationlist of XLL-H2200
1.Mechanical specifications: mechanical wheel width 2200mm, production linespeed: 3~35M/min.
Thepower source must be: three phase 380V, air pressure source: 5KG/ 2200L/min.
Two,mechanical specification: H-2200 type
1,send the coiler to share the trolley group A word vehicle, a total of 2.
2,A material feeding side opposite double cylinder oil cylinder side set (withPID check contrast electric eye), and 88 electroplating guide wheel *2 branch.
3,the operation table operates the foot pedal and the membrane is torsionaltorque motor mechanism group and the electroplating guide wheel *3 88.
4,the film transmission film transmission rack and contact 160 rubber wheel *1HPvariable frequency drive and film transmission gas expansion shaft 1 branches.
5,tension control group before glue, 75 aluminum wheels, two wheeled tensiongalloping group, with precision gas piping element group.
6,the upper part of the glue is striped and the 125 wheels are deployed.
7,glue unit 250 on carvings wheel 2HP frequency conversion main speed controldrive chain rack and rotary joint and bearing and hook type paste board andpneumatic lifting mechanism group and 250 back pressure wheel, distributionhands-on clearance display control group.
8,fit the front expansion wheel A material fitting front strip expansion wheeland 0.5HP variable frequency drive and B material fitting front aluminum pieceexpansion wheel.
9,the fitting unit is fitted with the electroplating wheel 250*2HP frequencyconversion drive and the 250 rubber back pressure wheel and the 250 compressionmirror roller and the Liming pneumatic lifting mechanism group, thedistribution hands-on clearance display control.
10,cooling wheel group 250, electroplating cooling wheel *2 support and rotaryjoint and bearing.
11,B material sending rack 160 rubber drive wheel *2HP variable frequency drive doublewheel cylinder side set, 88 88 electroplating guide wheel.
12,a pair of spring shredding rollers of the feeding group.
13,take-up front tension group 100 aluminum wheel tension dancing group, withprecision gas piping element group, aluminum roll before take-up.
14,the surface winding arm group 160 rubber transmission wheel *2HP variablefrequency drive and pneumatic lifting mechanism group and the pre rollingaluminum sheet unrolling wheel (no transmission) and the rotary arm reversepressure precision pressure piping component group, 88 electroplating guidewheel *2.
15,oil temperature machine precision computer adjustable oil temperature machine0-180 degrees, 18kw.
16,replace wheel crane group carvings wheel replacement with monorail 500KG singleaction lifting crane group.
17,the glue machine 200KG hot sol glue machine one.
18,electronic control unit, electronic distribution box group and man-machinetouch interface operation box.
19,1 years after the completion of the commissioning and installation of thewarranty, the warranty shall be reasonable if the damage is caused by improperoperation.
20,spares NO