手电吧 关注:175,206贴子:5,315,996

[搬运]迈特明酷mt18国外测评,有拆机哦!

只看楼主收藏回复

慢慢发!先上点图







来自Android客户端1楼2017-08-05 12:54回复
    二楼自己的要注意,mt18出口版是贴了别的商标的,大家不要奇怪


    来自Android客户端2楼2017-08-05 12:56
    收起回复
      2025-06-13 11:13:01
      广告
      快拆机 看了我好下决定~~~


      IP属地:贵州来自Android客户端3楼2017-08-05 12:56
      收起回复
        快,坐等


        IP属地:广西来自Android客户端4楼2017-08-05 13:00
        收起回复
          Comparism and teardown:
          Size compared to other 18650 lights, I do not own SRK size lights, the MF-01 is a bit bigger than them as the head has a lager diameter than the battery tube
          Beam color is neutral around 5000K for the Nichia 219C model, the Nichia has a nice uniform beam and color rendering is great
          The LEDs are reflowed ok could be better and the MCPCB is perfectly flat, but not polished
          Unfortunately on my sample there was a little solder under the LED board and the heat paste was not evenly spreadand some small dust particles on the domes of some LEDsfrom left to right the lights get warmer, picture taken @5000K camera setting
          left Astrolux S42 Nichia 219C 5000K, Astrolux MF-01 Nichia 5000K, XPL HD 1A 6500K
          The LEDs in this light are available XP-G3 and Nichia 219C
          The light can be taken apart completely, nothing is glued
          The light has a massive tail cap with holes for a lanyard, and tail stands rock solid
          The head has a diameter of 72mm and 62mm visible of the TIR optic
          The battery carrier comes with a warning not to put in the batteries in reverse polarity


          来自Android客户端5楼2017-08-05 13:02
          收起回复
            坐等,表示英文看不懂


            IP属地:山东来自Android客户端6楼2017-08-05 13:03
            回复








              来自Android客户端7楼2017-08-05 13:04
              回复
                快更新


                IP属地:广西来自Android客户端8楼2017-08-05 13:04
                收起回复
                  2025-06-13 11:07:01
                  广告
                  参观一下


                  IP属地:安徽9楼2017-08-05 13:04
                  回复
                    The driver can’t be pulled out easily, the LED leads have to be unsoldered
                    The light uses 3 separate buck regulators
                    The light can be physical locked out by twisting the tail cap or head about a 1/2 turn



                    来自Android客户端11楼2017-08-05 13:06
                    回复
                      再放点细节图,待会有功率测试


                      来自Android客户端12楼2017-08-05 13:09
                      回复











                        来自Android客户端13楼2017-08-05 13:10
                        回复
                          各档位功率,图片就不搬运了
                          Moon 0.125W 8.3V and 15mA
                          This is not really accurate with the clampmeter, I guess the real current is lower
                          Low 6.4W 8.25V and 0.78A
                          High 57.4W 8V and 7.17A
                          Turbo 120W 7.66V and 15.67A


                          来自Android客户端14楼2017-08-05 13:12
                          回复
                            继续啊


                            IP属地:河北来自Android客户端15楼2017-08-05 13:12
                            收起回复