surface_pro4吧 关注:1,204贴子:3,884
  • 4回复贴,共1

【转】【 i5 i7 提高显卡能力25%技巧】

取消只看楼主收藏回复

入了Surface pro4后一直在此吧混,多是一些抱怨翘屏,漏光等问题帖子,最多也就开箱贴了。有营养的帖子不多,这次给此吧来剂大营养,希望大家可以100%发挥出Surface的潜力。
微软为了提高电池的续航时间将显卡默认频率设为750mHZ, 实际HD Graphics 520默认为1000mHz, 530则更高. 而且微软屏蔽了该用户设置,所以在一般台式机和笔记本中你可以在电源配置里看到3个选项,即“省电,平衡,最佳性能”,而在Surface pro4中只有"省电和平衡"。
下面我就给大家介绍如何打破微软的限制,将Surface的电源配置改成最佳性能。
The reason for this is not too clear although there is a balance between battery life and thermal dissipation on the Surface series that limits the most extreme settings. Throttling at certain temperatures is not uncommon with the Surface due to its rather great thinness. Due to Skylake the Surface Pro 4 and Surface Book so far have no exhibited throttling under normal conditions, an improvement over the Surface Pro 3's Haswell system.
In fact, doing this 'hack' (I use the term loosely) draws more power: 2.4W versus 4.0W when set to max performance. Luckily, you can configure this so that the Intel HD 520 is only used in max 1000 MHz when either plugged into an AC outlet or you purposefully choose the Max Performance preset.
懂英文的朋友可以直接点下面的视频教程链接:
http://www.windowscentral.com/how-max-intel-hd-graphics-surface-pro-4


IP属地:山西1楼2016-01-10 13:15回复
    感谢@simpleluv @simpleluv


    IP属地:山西2楼2016-01-10 13:16
    回复
      第一步 打开注册表 搜索 CsEnable, 将值设置成0, 重启Surface


      IP属地:山西3楼2016-01-10 13:17
      收起回复
        打开电源配置,创建新的电源配置,输入"最佳性能"




        IP属地:山西4楼2016-01-10 13:20
        回复
          设置重启后,可以在平衡和最佳性能之间切换,在Plug-in模式下玩游戏时当然切换到最佳性能,不玩了再切还回来是不是很方便而且对系统的续航能力也没半点影响。
          最后还要提醒一下,全部设置完成后记得把CsEnable的值再改回来,即改成1。不然Surface无法进入自动睡眠模式。
          好的技巧经验分享到这里,希望对大家能有帮助。


          IP属地:山西6楼2016-01-10 13:24
          回复