[HEADER] VERSION=1 POWER_CURVE=power.lut; power curve file COAST_CURVE=FROM_COAST_REF ; coast curve. can define 3 different options (coast reference, coast values for mathematical curve, coast curve file) [ENGINE_DATA] ALTITUDE_SENSITIVITY=0.1; sensitivity to altitude INERTIA=0.09; engine inertia LIMITER=13000; engine rev limiter. 0 no limiter LIMITER_HZ=30; Frequency of engine limiter MINIMUM=3000; Idle rpm DEFAULT_TURBO_ADJUSTMENT=1 ; DEFAULT turbo adjustment if one or more turbos are cockpit adjustable [COAST_REF] RPM=15000; rev number reference TORQUE=110; engine braking torque value in Nm at rev number reference NON_LINEARITY=0; coast engine brake from ZERO to TORQUE value at rpm with linear (0) to fully exponential (1) [COAST_DATA]; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data COAST0=0; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data COAST1=0; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data COAST=0.0000015; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data [COAST_CURVE]; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data FILENAME=coast.lut; OBSOLETE SECTION. Must copy to keep AC from crashing, but do not use for data [TURBO_0] LAG_DN=0.999; Interpolation lag used slowing down the turbo LAG_UP=0.98; Interpolation lag used to spin up the turbo MAX_BOOST=5; Maximum boost generated. This value is never exceeded and multiply the torque like T=T*(1.0 + boost), so a boost of 2 will give you 3 times the torque at a given rpm. WASTEGATE=3.5; Max level of boost before the wastegate does its things. 0 = no wastegate DISPLAY_MAX_BOOST=3.5; Value used by display apps REFERENCE_RPM=12000; The reference rpm where the turbo reaches maximum boost (at max gas pedal). GAMMA=2; Turbo pressure sensitivity on accelerator pedal 2 COCKPIT_ADJUSTABLE=0; cockpit adjustable turbo pressure